The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the car from starting if it isn't equipped with an identification card. They also help to stop hotwiring or other traditional types of vehicle theft. Modern methods such as key cloning or relay theft are becoming more common.
To combat these latest trends, the ghost immobiliser works to make your vehicle completely inaccessible. It doesn't use LED indications radio signals, key fobs. It is quiet and discreet.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to prevent key theft and cloning. It is an TASSA approved product and is endorsed by insurance companies. It is silent and virtually undetectable to thieves. It makes use of buttons on your steering wheel and central console to create a unique pin-code sequence that you have to enter before you can start your vehicle. You can create up to 20 different sequences for increased security. The system is simple to install and doesn't require any additional wiring or hardware.
To get the most effective results It is recommended that you use a reputable CAN-immobiliser installer who specializes in your specific vehicle. It is ideal if they have a workshop located in your local area to enable you to go and get your installation completed. They'll also have a variety tools and materials to assist you in the process of installing. They will have basic hand tools, a multimeter, and insulation tape and heat shrink tubing to safeguard connections. A user manual will provide specific instructions for your vehicle's wiring.
Disconnect the battery before beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is vital because a mistake in identification could result in a faulty integration of the system. It is recommended to mark the wires using small bits of tape or mark them with labels. Use a multimeter to confirm that the power source is supplying an uninterrupted 12V.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers. This includes jamming or spoofing. These methods work by amplifying signals sent from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming techniques and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Security enhancing
Ghost immobilisers offer an additional layer of security to guard your car from theft. It works with an PIN code protection system that is operated by using buttons that are already on the steering wheel or on your dashboard which makes it difficult for thieves to access the device and take your vehicle. The device is designed to be hidden inside your vehicle. It doesn't have any lights, or other signals to alert burglars to its presence. It connects directly to the ECU of your car through the data bus. This means it isn't vulnerable to relay attacks or hacking.
It's a fantastic option for those who own prestige cars, which are at higher chance of being stolen due to their value and popularity. Its advanced features shield your car from key duplicates and ECU swapping. Some ghost immobilisers may be linked to an app, allowing you can easily arm and disarm them. They can include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
A ghost immobiliser has another excellent feature that it doesn't require any cutting of wire. This is an excellent feature, especially if the vehicle is newer and does not have an immobiliser built in. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker can also reduce your insurance costs. If you decide to purchase a ghost immobiliser make sure it is TASSA-verified and that an experienced installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser is designed to work with all major makes and models of vehicle, safeguarding your prized possessions from theft. It creates a unique pin code by pressing buttons on your steering wheel, console, or door panels. You must enter the code before you can drive. The system is tamper-proof, undetectable, and is covered by a three-year warranty. It is also fully endorsed by insurance companies and insurance companies, which means it can lower your premiums.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is connected directly to the engine controller through the CAN bus. This means it is secure from tampering, is nearly impossible to disable or remove and is not targeted by organized car theft groups. In addition it is possible to use the Ghost system can be paired with an encrypted iPhone application that permits remote management and monitoring.
You can choose a PIN code that is simple to remember, yet mathematically impossible for thieves to figure out. You can customize and change the PIN at anytime to ensure your vehicle's security even if it's located in a parking lot or on the street. You can also select the valet or service mode when you need someone else to drive your vehicle for a short period, such as when it's in the garage. This feature can also help to prevent your car from being stolen by a shady mechanic. To give you more peace of mind you can select a Ghost call alert that will notify you if your vehicle is moving or if it's been moved.
Convenience
The ghost immobiliser shields your vehicle from theft methods like key replication or relay attacks. It works by connecting with the vehicle's data network CAN, and blocking communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your vehicle, making the installation of this system a great idea for any driver.
Installed, you'll need to enter a PIN of up to 20 digits in length using the buttons on the dashboard and steering wheel to start the car. The system is completely concealed and undetectable to thieves, since it doesn't emit any radio frequency signals. It is also able to be programmed to change the PIN of the user, which further adds to its security. The system is also designed to prevent cutting the circuit and makes it virtually impossible to alter.
If you do have a problem remembering your PIN, there are systems that let you communicate with the immobiliser through an app on your phone and instantly disarm it. Some systems even have a valet/service setting that allows you to start your car for example when you drop it off at valet or garage.
The Ghost Immobiliser is also inaccessible to thieves, since it transmits no radio signals. This is a significant benefit over other aftermarket security systems. Additionally, it is simple to use and doesn't require any complex wiring. It can also be used together with a dash camera for added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to guarantee maximum performance and longevity.
g28carkeys
If you're looking to secure your vehicle from thieves it is important to select the correct immobiliser ghost. This device can prevent car thefts by preventing the communication between key fobs as well as the engine controller unit. This prevents thieves from intercepting the signal and cloning your key fob to start your car. It can also detect any signs of manipulation and notify the owner of the vehicle.
The device is easy to install and works with the existing systems of your vehicle. It doesn't require any modifications to the wiring of your vehicle and can be hidden in a hidden area, like under the dashboard. Follow the directions in the manual to ensure the device is installed correctly. It is also essential to test the system after installing it. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or disable the system. The installation process typically takes 2-3 hours.
During the process of installation it is recommended to review the wiring diagram of the model of your vehicle. This will allow you to locate the CAN High and CAN Low wires that are required to connect the Ghost to your vehicle's engine. It is also essential to verify the connections to ensure that they are secure and insulated.
Once the installation is completed, you can start using the Ghost Immobiliser in a normal manner. It will turn off the ignition of your vehicle in the event that it is not started with the correct PIN code, which you can create yourself. The ghost of the immobiliser can be set to Service/Valet Mode in case you need your vehicle cleaned or valet parking.